beautypg.com

12 network scanning, Before using network scanning, Network license – Brother MFC-9325CW User Manual

Page 204: Network scanning

background image

196

12

12

To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can
set or change the address settings from the control panel (see Control Panel Setup in the Network User’s
Guide
) or by using the BRAdmin Professional software. If you installed the machine following the instructions
for a network user in the Quick Setup Guide then the machine should already be configured for your network.

Note

• For network scanning, a maximum of 25 clients can be connected to one machine on a network. For

example, if 30 clients try to connect at a time, 5 of those clients will not be shown on the LCD.

®

> If your PC is protected by a firewall and is unable to network scan, you may need to

configure the firewall settings to allow communication through port number 54925 and 137. (See Before
using the Brother software
on page 104.)

Before using Network Scanning

12

Network license

12

This product includes a PC license for up to 5 Users.
This license supports the installation of the MFL-Pro Software Suite including ScanSoft™ PaperPort™ 11SE
on up to 5 PCs on the network.
If you want to use more than 5 PCs with ScanSoft™ PaperPort™ 11SE installed, please buy the Brother NL-5
pack which is a multiple PC license agreement pack for up to 5 additional users. To buy the NL-5 pack,
contact your Brother dealer or Brother customer service.

Network Scanning

12

This manual is related to the following products: