Brother HL-6050DN - Manual (Page 93)

3 - 22 CONTROL PANEL
Set IP Address
Press the + or - button until NETWORK appears (and to display each setting
shown below).
Press the Set button.
Press the Set button.
Press the + button.
Press the Set button.
The last digit in the first part of the number is blinking.
Press the + or - button to increase or decrease the number.
Press the Set button to go to the next number.
Repeat this process until you have set your IP address.
Press the Set button to complete the IP address.
An asterisk appears at the end of the display.
INFORMATION
NETWORK
TCP/IP
TCP/IP ENABLE
IP ADDRESS=
19 2 .0.0.192*
123. 0 .0.192*
123.45.67.8 9
123.45.67.89*