Brother HL-6050DN - Manual (Page 15)

1 - 7 ABOUT THIS PRINTER
Recommended paper
■ Before you buy a lot of paper, please test some to make sure that the paper is suitable.
■ Use paper that is made for plain-paper copying.
■ Use paper that is 75 to 90 g/m 2 (20 to 24 lb).
■ Use neutral paper. Do not use acidic or alkaline paper.
■ Use long-grain paper.
■ Use paper with a moisture content of approximately 5%.
■ This printer can use recycled paper that meets the DIN 19309 specification.
Caution
Do not use ink jet paper, it may cause a paper jam and damage your printer.
To help you choose which paper to use with this printer, see Important information for choosing your
paper on page A-5.
Europe USA
Plain paper Xerox Premier 80 g/m 2 Xerox 4200DP 20 lb
Recycled paper Xerox Recycled Supreme 80 g/m 2
Transparency 3M CG3300 3M CG 3300
Labels Avery laser label L7163 Avery laser label #5160
When you print on smaller sized short-grain paper (A5, A6 and Executive), do the following:
Go to the Basic tab of the printer driver, in the Media Type option select Envelopes. And then, at
the back of the printer, open the back output tray and push down the two blue tabs one on the left
and one on the right hand side (as shown in Figure 1-4). When you have finished printing, close the
back output tray to reset the two blue tabs back to their original position.
Figure 1-4