Brother HL-6050DN - Manual (Page 38)

ABOUT THIS PRINTER 1 - 30
5
Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer.
Figure 1-38
6
Send the print data to the printer.
Figure 1-39
Caution
Remove each transparency before the next page is output on the top output tray to prevent
transparencies from sticking to each other.
Do not put more than 10 transparencies in the tray at any one time, or it may cause a jam. Check
that transparencies are below the maximum paper mark (
▼ ).
Figure 1-37