Wireless print server (nc-7100w), Installing the network board, Wireless print server (nc-7100w) -6 – Brother HL-6050DN User Manual
Page 106: Installing the network board -6, See 4-6

OPTIONS 4 - 6
Wireless print server (NC-7100w)
The Brother NC-7100w wireless print server supports the IEEE 802.11b and 802.11g wireless
networking standards and can work in Infrastructure or Ad-hoc mode using common wireless
authentication and security methods.
For more information, see the NC-7100w Network User’s Guide on the CD-ROM and the Quick Setup
Guide that we have supplied with the NC-7100w wireless print server.
Installing the network board
1
Turn off the printer power switch, and then unplug the printer if connected. Disconnect the interface
cable from the printer.
2
Slide and remove the side cover of the printer.
Figure 4-8
3
Open the interface access cover.
Figure 4-9
This manual is related to the following products: