Brother HL-6050DN - Manual (Page 23)

1 - 15 ABOUT THIS PRINTER
5
While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
Figure 1-16
6
Send the print data to the printer.
Figure 1-17
Make sure that the paper is straight and in the proper position on the MP tray. If it is not, the paper
may not be fed properly, resulting in a skewed printout or a paper jam.
When you put paper in the MP tray, please remember the following:
■ The side to be printed on must be face up.
■ During printing, the inside tray rises to feed paper into the printer.
■ Put the leading edge (top of the paper) in first and push it gently into the tray.
■ The top of the paper stack must be under the maximum paper height guides that are on both
sides of the tray.