Brother HL-6050DN - Manual (Page 73)

3 - 2 CONTROL PANEL
Buttons
You can control the basic printer operations and change various printer settings with seven buttons (Go,
Job Cancel, Reprint, +, -, Back, Set).
Go button
You can change the panel indications from the current status (Menu, Error and Reprint settings) by
pressing the Go button once. For ERROR indications, the control panel only changes when the error is
cleared.
You can pause printing with the Go button. Pressing the Go button again restarts the print job and clears
the pause. During a pause, the printer is off line.
Job Cancel button
You can cancel the processing or printing of data with the Job Cancel button. The display shows JOB
CANCELLING until the job is cancelled. After cancelling the job, the printer returns to the READY state.
When the printer is not receiving data or printing, the display shows No Data!!! and you cannot cancel
the job.
Button Operations
Go Exit from the control panel menu, reprint settings and error messages.
pause and continue printing.
Job Cancel Stop and cancel the printing job in progress.
Reprint Select the number of extra copies (1-999).
+ Move forward through menus.
Move forward through the available options.
- Move backward through menus.
Move backward through the available options.
Back Go back one level in the menu.
Set Select the control panel menu.
Set the selected menus and settings.
If the printer is in PAUSE mode and you do not want to print the data that is left, you can cancel the
job by pressing the Job Cancel button. Once the job has been cancelled the printer will return to
the READY state.