Brother HL-6050DN - Manual (Page 19)

1 - 11 ABOUT THIS PRINTER
2
Pull the paper tray completely out of the printer.
Figure 1-7
3
While pressing the blue paper-guide release lever, slide the paper guides to fit the paper size.
Check that the guides are firmly in the slots.
Figure 1-8
4
To avoid paper jams and misfeeds, fill up the paper tray with small stacks of paper that you have
fanned well. Put the side that is going to be printed on first (blank side), face down, with the leading
edge (top) of the paper in last (at the front of the tray). Check that the paper is flat in the paper tray
at all four corners.
Figure 1-9