Brother HL-6050DN - Manual (Page 88)

CONTROL PANEL 3 - 17
PRINT MENU
Display Shows Description
MEDIA TYPE =PLAIN PAPER, TRANSPARENCIES, THICK PAPER, THICKER PAPER, THIN
PAPER, BOND PAPER, ENVELOPES, ENV.THIN, RECYCLED PAPER
PAPER Sets the paper size to LETTER, A4, LEGAL, FOLIO, EXECUTIVE, COM-10,
MONARCH, C5, DL, DLL, B5, A5, A6, B6, JIS B5, A4 LONG, POST CARD,
ORGANIZER J, ORGANIZER K, ORGANIZER L, ORGANIZER M
COPIES You can check the total number of printed pages.
Shows the number of printed pages (1 to 999).
ORIENTATION This printer can print pages in portrait or landscape orientation.
PORTRAIT or LANDSCAPE
PRINT POSITION This printer can be adjusted to align the page format.
Subsetting Description
X OFFSET=0 =-500, -499 ... + 499, +500
Moves the print start position (at the top-left corner of
pages) horizontally up to -500 (left) to +500 (right) dots in
300 dpi.
Y OFFSET=0 =-500, -499 ... + 499, +500
Moves the print start position (at the top-left corner of
pages) vertically up to -500 (up) to +500 (down) dots in
300 dpi.
AUTO FF TIME =OFF/1, 2, 3 ... 99 (sec)
Allows you to print the remaining data without pressing the Go button.
FF SUPPRESS =OFF/ON
Turns the feed suppress (PAUSE) setting ON or OFF.
HP LASERJET Subsetting Description
FONT NO. =I000 ... ####
FONT PITCH/POINT =##.##
SYMBOL SET PC-8/...
Sets the symbol set or the character set.
TABLE PRINT Prints code table.
AUTO LF =OFF/ON
ON: CR
→
CR+LF,
OFF: CR
→
CR
AUTO CR =OFF/ON
ON: LF LF+CR, FF+CR, or VT
→
VT+CR
OFF: LF
→
LF, FF
→
FF, or VT
→
VT
AUTO WRAP =OFF/ON
Selects whether a line feed and carriage return will
happen when the printer reaches the right margin.
AUTO SKIP =ON/OFF
Selects whether a line feed and carriage return will
happen when the printer position reaches the bottom
margin.
LEFT MARGIN =##
Sets the left margin at column 0 to 70 columns at 10 cpi.