Milestone Central 3.7 - Manual (Page 57)

Milestone XProtect 3.7; Administrator’s Manual
Editing a Time Profile
To edit an existing time profile, right-click the required time profile in the Client’s Navigation
section, then select Edit Time profile...
This will open the Time Profile window, in which you are able to edit the definition of the alarm. The
Time Profile window’s fields are described in Defining a New Time Profile on page 55.
In the Time Profile window, edit the time profile as required. Remember that a time profile may
contain more than one time period, and that time periods may be recurring.
Tip: The small month overview in the top right corner of the Time Profile
window can help you get a quick overview of the time periods covered by the
time profile, as dates containing specified times are highlighted in bold. In the
illustration to the right, the bold dates indicate that time periods have been
specified on several days, and that a recurring time may have been specified
on Mondays.
When you have made the required changes to the time profile, click the Time
Profile window’s OK button.
Deleting a Time Profile
To delete an existing time profile, right-click the unwanted time profile in the Client’s Navigation
section, then select Delete Time Profile...
You will be asked to confirm that you want to delete the time profile; if you are sure, click OK to
delete the alarm.
You cannot delete a time profile if it is used by an alarm definition. When this is the case, you must
change the alarm definition before deleting the time profile.
Alarm Priority Names & Colors
You are able to edit alarm priority names (by default called Priority 1 to Priority 6) as well as the
colors used when listing alarms in the Client’s Alarm Overview section. Do the following:
1. In the Client’s Navigation section, expand Settings, right-click Priority Definition, and select
Edit priority definition... This will open the Priority Definition window:
www.milestonesys.com Page 57 Client: Alarms