Milestone Central 3.7 - Manual (Page 25)

Milestone XProtect 3.7; Administrator’s Manual
Client: Installation
Upgrading from Previous Version
If upgrading from XProtect Central version 3.1 to version 3.7, you do not need to remove your
previous XProtect Central Client version; it will be overwritten when you install the latest Client
version.
Installation Procedure
1. Shut down any Milestone software running.
2. Insert the XProtect Central software DVD. After a short while, the Milestone XProtect
Central Client Setup Wizard will open.
Tip: If the Milestone XProtect Central Client Setup Wizard does not open automatically
upon inserting the DVD, run the CentralClientInstaller.exe file from the DVD. Alternatively,
if you are installing a version downloaded from the internet, run the .exe file from the
location you have saved it to.
3. On the wizard’s first page, click Next:
4. On the wizard’s second page, select the folder in which you want to install XProtect Central.
Also select whether just yourself or everyone using the computer should be able to access
the XProtect Central Client; if in doubt, select Everyone.
www.milestonesys.com Page 25 Client: Installation