Dwyer 32DZ - Manual (Page 25)

June, 2000 Page 25 of 40 949-1318
address 17 17 17 17 17 and Zone 2 is assigned to address 18 18 18 18 18 ). To
change this parameter, see Addr Addr Addr Addr Addr in the Secure Menu.
SECURE MENU
Hold UP ARROW & ENTER for 5 Seconds. Press INDEX to advance
to the next menu item. Press UP ARROW or DOWN ARROW to
change the value in the display. Press ENTER to retain the value.
OUTPUTS ARE DISABLED (TURNED OFF) WHILE THE INSTRU-
MENT IS IN SECURE MENU.
If Edit Edit Edit Edit Edit is set to 0 00 00 , begin.
If Edit Edit Edit Edit Edit is set to 1 11 11 or 3 33 33 , jump to SEC1 SEC1 SEC1 SEC1 SEC1 on page 26.
If Edit Edit Edit Edit Edit is set to 2 22 22 , jump to SEC2 SEC2 SEC2 SEC2 SEC2 on page 29.
Note: There are no standard menu items for the Secure Menu
when
Edit Edit Edit Edit Edit is set to 0 00 00 .
Addr Addr Addr Addr Addr (Option 992, Serial Communications) Control Address: Select
from
1 11 11 to 3FE 3FE 3FE 3FE 3FE . This number (hexadecimal, base 16) must match
the address number used by the host computer. The value
displayed is for Zone 1. The address for Zone 2 is the value for
Zone 1 plus one (e.g. if
Addr Addr Addr Addr Addr is set to 17 17 17 17 17 , Zone 1 is assigned to
address 17 17 17 17 17 and Zone 2 is assigned to address 18 18 18 18 18 ). Addresses
100 100 100 100 100 , 200 200 200 200 200 , and 300 300 300 300 300 are reserved for Factory use.
bAUd bAUd bAUd bAUd bAUd (Option 992, Serial Communications) Communication Baud
Rate: Select
300 300 300 300 300 , 1200 1200 1200 1200 1200 , 2400 2400 2400 2400 2400 , 4800 4800 4800 4800 4800 , 9600 9600 9600 9600 9600 , or 192 192 192 192 192 00. This
number must match the baud rate used by the host computer.
nAt nAt nAt nAt nAt (Option 992, Serial Communications) No Activity Timer:
Set from
OFF OFF OFF OFF OFF or 1 11 11 to 99 99 99 99 99 minutes.
1 11 11 - 99 99 99 99 99 Maximum time between host computer accesses.
If timer counts to 0,
CHEC CHEC CHEC CHEC CHEC LorE LorE LorE LorE LorE will be displayed.
OFF OFF OFF OFF OFF No Activity Timer function is disabled.
End of Secure Menu when Edit Edit Edit Edit Edit is set to 0 0 0 0 0 .