Secondary menu, Menu selections primary menu secondary menu – Dwyer 32DZ User Manual

Page 15

June, 2000

Page 15 of 40

949-1318

SECONDARY MENU
Hold UP ARROW & ENTER. Press INDEX to advance to the next
menu item. Press UP ARROW or DOWN ARROW to change the
value in the display. Press ENTER to retain the value.

Edit

Edit Set Point parameters: Select

, or

Edit function is off.

Edit Secondary and Secure Menus for Set Point 1.

Edit Secondary and Secure Menus for Set Point 2.

Edit Secondary and Secure Menus for both Set
Points in sequence (menu items for Set Point 1

followed by menu items for Set Point 2).

Edit

is set to

, begin.

Edit

is set to

, jump to

Out1

on page 17.

Edit

is set to

, jump to

Out2

on page 21.

PEA1

The Peak feature stores the highest input the control has
measured for Zone 1 since the last reset or Power On. At
Power On,

PEA1

is reset to the present input value. To

manually reset the value

PEA1

must be in the lower display.

Press the ENTER key to reset.

PEA1

will be reset and

display the present input value.

UAL1

The Valley feature stores the lowest input the Instrument
has measured for Zone 1 since the last reset or Power On.
At Power On,

UAL1

is reset to the present input. To manually

reset the value

UAL1

must be in the lower display. Press

the ENTER key.

UAL1

will be reset and display the present

input value.

PEA2

The Peak feature stores the highest input the control has
measured for Zone 2 since the last reset or Power On. At

MENU SELECTIONS

PRIMARY MENU
Press INDEX to advance to the next menu item. Press UP ARROW or
DOWN ARROW to change the value in the display. Press ENTER to retain
the value.

SP1

Set Point 1 Adjust, Control Point 1.

SP2

Set Point 2 Adjust, Control Point 2.