Thermo Fisher Scientific CyberScan DO 110 - Manual (Page 30)

Instruction Manual CyberScan DO 110
25
measurement mode.
8.2.4 P1.4: Select mg/L or ppm mode
(Only in mg/L (ppm) Set Up mode)
From the mg/L (ppm) Set Up mode,
1. Press the HOLD/ENTER key four times to enter the
mg/L or (ppm) mode selection menu “dO”.
2. Use the ▲ and ▼ keys to select the desired mode
of measurement.
3. Press the HOLD/ENTER key to confirm the
selection made and to return to the subgroup
menu.
4. Press the CAL key to return to the measurement
mode.
SETUP
p 1.4
SETUP
p 1.4
MR MI
mg/l
ppm
Figure 17: P1.4- Select mg/L or ppm
mode