beautypg.com

Thermo Fisher Scientific CyberScan DO 110 User Manual

Page 10

background image

Instruction Manual

CyberScan DO 110

5

NOTE: Do not substitute other probes or electrodes. For replacement
probe, see the “Accessories” section.

Keep connector dry and clean. Do not touch connector with soiled hands.

1. Line up the notch and 6 pins on the meter with the holes in the 6 pin

connector. Push down and screw the metal sleeve to lock the probe connector
into place.

2. To remove probe, unscrew the metal sleeve and slide up the probe connector.

While holding onto metal sleeve, pull probe away from the meter.

CAUTION: Do not pull on the probe cord or the probe wires might
disconnect.