Thermo Fisher Scientific CyberScan DO 110 - Manual (Page 26)

Instruction Manual CyberScan DO 110
21
8.1 Advanced SETUP Mode Overview
Press the SETUP key to enter Setup mode. Press the MI/▲ and MR/▼ keys to scroll
through the sub groups.
SETUP
P 1.0
COF
P1.0: Unit Configuration
P1.1 Ready indicator (On, Off or Auto Hold)
P1.2 Select °C or °F temperature units
P1.3 Select Automatic Temperature Compensation (ATC)
P1.4 Select mg/L or ppm mode (from mg/L or ppm mode
only)
SETUP
pH CAL
P 2.0
P2.0: View Previous pH Calibration Data (View only)
P2.1 % Saturation calibration point ( from % Saturation
setup) or mg/L(ppm) calibration point (from mg/L or
ppm setup only)
SETUP
ELE
P 3.0
P3.0: View Electrode Data (View only)
In % Saturation mode:
EL.1 Electrode
Slope Factor
EL.2 % Saturation Offset
EL.3 100% Saturation mV value
EL.4 0% Saturation mV value
In mg/L (or ppm) mode:
EL.1 Electrode
Slope Factor
EL.2 100% Saturation mV value
EL.3 0% Saturation mV value
SETUP
P 4.0
A 0
P4.0: Select Auto Power On/Off
P4.0 Select auto power on or off
SETUP
P 5.0
P5.0: Reset to Factory Default
P5.1 Reset calibrated data
P5.2 User reset back to factory default values
MEM SETUP
P 6.0
P6.0: Memory Clear
P6.0 Clear all stored readings