Thermo Fisher Scientific CyberScan DO 110 - Manual (Page 21)

Instruction Manual CyberScan DO 110
16
7.2 Sending Data To Computer or Printer
When the PRINT key is pressed, there are two options:
• dAt / CUr: Print Data on Timed Interval basis. You can print any data
automatically based a pre-set timing from 5 to 30 seconds.
• dAt / StO: Print Stored Data from Memory. This simply dumps all data stored
in memory. You cannot print data from selected memory locations.
See Figure below.
ENTER
HOLD
ENTER
HOLD
MI MR
From measurement mode.
Figure 9: Print data based on timed interval or from memory