Thermo Fisher Scientific CyberScan DO 110 - Manual (Page 29)

Instruction Manual CyberScan DO 110
24
8.2.2 P1.2: Select °C or °F temperature units
The DO 110 meter lets you select between °C and °F
units for temperature readings.
From measurement mode
1. Press SETUP key to enter Set Up mode.
2. Press the MI/▲ or MR/▼ keys to scroll through
subgroups until you view parameter P1.0.
3. Press the HOLD/ENTER key two times to select
parameter 1.2.
4. Press the MI/▲ or MR/▼ keys to toggle
between °C and °F.
5. Press the HOLD/ENTER key to confirm
selection and to return to the subgroup
menu. Press the CAL/MEAS key to return to
measurement mode.
8.2.3 P1.3: Selection of Automatic or Manual Temperature Compensation
This feature lets you select between Automatic
Temperature Compensation (ATC) and Manual
Temperature Compensation (MTC). Meter default is ATC.
From measurement mode
1 Press SETUP key to enter Set Up menu.
2 Press the HOLD/ENTER keys until you view
parameter P1.3.
3 Press the HOLD/ENTER key again. The upper
display shows “ATC” and the lower display shows
“YES” or “NO”.
4 Press MI/▲ or MR/▼ keys to select between
Automatic and Manual Temperature
Compensation.
• “YES” activates the Automatic Temperature
Compensation function.
• “NO” activates the Manual Temperature
Compensation function.
5 Press the HOLD/ENTER key to confirm
selection and to return to the subgroup menu.
6 Press the CAL/MEAS key to return to
Figure 15: P1.2 - Select
temperature units, °C or °F
°F
°C
SETUP
f
p 1.2
SETUP
C
p 1.2
MR MI
SETUP
YES °C
ATC
SETUP
P 1.3 °C
ATC
SETUP
°C
HOLD
ENTER
MI MR
Figure 16: P1.3-Select Automatic or
Manual Temperature Compensation