Techne PrimeG - Manual (Page 53)

52
CURRENT STATUS
The Current Status area of the Home Screen provides status information on the Prime and is used to
access the Run Screen.
On the Home Screen, the Current status area shows
the versions of software and firmware loaded on the
unit.
• Touch the Current status button to view the
status of the Prime.
The Prime status will be shown.
If a unit is running a program, as shown by the status,
the Run Screen can be viewed. Runs can then be
paused or stopped as required.
• Touch the area to select the unit.
• Touch View.
• Touch Cancel to return to the Home Screen.