Techne PrimeG - Manual (Page 46)

45
RUN A PROGRAM
From the Home Screen, touch one of the shortcuts to run one of the listed programs, or touch Run a
program to search and select from other programs and templates saved on the unit. Selected
programs can be run directly or edited before running.
RUNNING A PROGRAM FROM THE SHORTCUT LIST
On the Home Screen, the Run a program area displays shortcuts to four programs. User Preferences
in the Settings module can be used to select whether this displays the four most recently used
programs or the four most frequently used programs.
• To run one of the programs in the shortcut list,
touch the button to open the Pre-run Screen.
THE PRE-RUN SCREEN
The Pre-run Screen shows a graphical representation of the program allowing for a rapid check of the
temperature parameters.
The centre of the screen shows each temperature step
and hold time (not to scale). Stages are indicated by a
white bar spanning the steps within the stage.
The bottom of the screen shows the program name,
the date and the expected end time if it was started
immediately.
• Touch Start to start the program.
• Touch Edit to edit the program.
• Touch Back to return to the previous screen.
Note: The temperature log will remain blank until the
program has been started.