Techne PrimeG - Manual (Page 32)

31
INSTRUMENT SETTINGS
Temperature Log Recording
To record the temperature logs (block temperature
profile) of each run, touch the button to set this to
Always. If temperature logs are not required, set to
Never.
Auto Resume On Power Loss
This determines whether the unit will restart after a
power failure. Setting Auto Resume to Always will
always allow the unit to re-start irrespective of the
length of the power failure.
Date and Time Settings
Use these settings to set the current date, time and
date format on the unit.
• When set, touch Back to return to the Settings
menu.
Date
• Touch Set Date in order to enter the current date.
• Use the + and – keys to set the date values.
• When the correct date has been set, touch OK to
return to the previous screen.
• Touch Cancel to return to the previous screen if no
changes are required.
Time
• Touch Time in order to enter the current time using
the 24 hour clock.
• Use the + and – keys to set the time values.
• When the correct time has been set, touch OK to
return to the previous screen.
• Touch Cancel to return to the previous screen if no
changes are required.