Techne PrimeG - Manual (Page 50)

49
RUNNING A PROGRAM NOT ON THE SHORTCUT LIST
• Once the required program has been identified,
touch it to highlight it.
The Program Selector Screen will show a summary of
the program, the instrument settings and a graphical
representation of the thermal cycling program.
• Touch Edit to edit the program if required.
• Touch Back to return to the Home Screen.
• Touch Start to proceed to the Pre-run Screen.
• From the Pre-run Screen, touch Start to run the
program.
See THE RUN SCREEN on page 46 for further
information on instrument status and progress during a
run.