Techne PrimeG - Manual (Page 26)

25
The temperature value will now appear orange in the
programming screen indicating that it contains a
modified function.
To decrease the step temperature per cycle:
• For a decrease in temperature per cycle, touch the
button below Decrease Per Cycle to turn this
function on. Next touch the temperature entry
button below this.
A new screen will open which is similar to the simple
temperature entry screen. The maximum decrease in
temperature per cycle (based on the number of cycles
and the temperature limits of the unit) will be shown.
• Enter the required value.
• Touch DEL to clear the entry.
• If an entered decremented temperature is invalid, a
prompt will indicate the acceptable range.
• Touch OK to return to the previous screen.
The decrease in temperature per cycle will now be
displayed.
• Touch OK again to return to the programming
screen.
• Touch Cancel to return to the programming screen
if no changes are required.