Revo R16/8/4/DVR - Manual (Page 93)

Remote Administration System Plus (RASplus)
37
Remote Event Log: Displays the event log information of the remote DVR connected to the Status panel.
NOTE: Refer to 3.3 Menu – Remote Menu for more details on the Remote System Log and Remote Event Log.
NOTE: When the remote site is not connected to the Status View panel, Remote Setup, Remote System Log and
Remote Event Log menus can be accessed by clicking the right mouse button after selecting the remote site on
the Remote Sites panel.
Remote Panic Control: Controls the panic recording of the remote DVR connected to the Status View panel.
The (On) button indicates that the remote DVR is not in the panic recording mode and you can start panic
recording by clicking the button. The (Off) button indicates that the remote DVR is in the panic recording mode
and you can stop panic recording by clicking the button.
NOTE: Remote Panic Control will be supported for the REVO PRO model only.
Status Display Window
The Status Display Window displays the event, alarm out, system check and recording status information of the remote
system connected to the Status View panel in real-time.
y Event: Displays events detected by the internal motion detector or by an external sensor. The status display of event
detection will continue during the preset dwell time of the event-driven recording.
Event Detection No Event Detection Event Off
y Alarm Out: Displays status of the alarm-out signals.
Alarm Out No Alarm Out Alarm Out Off
y System Check: Displays the function status of the camera, alarm, and recording.
Normal Irregular System Check Off
NOTE: Display of alarm and recording function status will be supported for the REVO PRO model only.
y Record From/To: Displays the record period.
y Status: Displays the recording, playback, archiving, clip-copy status.
On Off
NOTE: Display of archiving status will be supported for the REVO PRO model only.
Version: Displays the system version information.