Revo R16/8/4/DVR User Manual
Page 20

User’s Manual
14
y Version: Displays the software version of the DVR. To upgrade the software, connect a USB flash drive containing
the upgrade package file (.rui) to the DVR. Selecting Upgrade… and pressing the
button displays the Upgrade
screen. Select the desired upgrade file and press the
button. The system restarts automatically after completing
the upgrade.
y Setup: Imports saved DVR settings or exports the current DVR settings.
Import... – To import saved DVR settings, connect a USB flash drive containing the setup file to the DVR and select the
desired setup file. Selecting Include Network Setup changes the network settings.
Export... – To save the current DVR settings in .dat file format, connect a USB flash drive to the DVR and enter a file name
for the settings.
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
y Show System Log…: Displays the system logs (up to 5,000 from the latest). The icon will be displayed in the last
column for system activities of remote sites. Refer to Appendix – System Log for the details of system log information.
Log Message
Log Message
Log Message
Boot Up
Setup Export Cancel
Clip-Copy End (Local/Remote)
Upgrade (Local)
Schedule On
Clip-Copy Cancel (Local/Remote)
Upgrade Failure (Local)
Schedule Off
Clip-Copy Failure (Local/Remote)
Setup Begin
Clear All Data (Local)
Time Change (Local)
Setup End
Format Disk
Time Zone Change (Local)
Setup Imported
Auto Deletion
DISK FULL
Setup Import Fail
Search Begin (Local/Remote)
Shutdown
Setup Exported
Search End (Local/Remote)
Restart
Setup Export Fail
Clip-Copy Begin (Local/Remote)
DISK# BAD
y Change Password…: Changes the password.