Clip-copy – Revo R16/8/4/DVR User Manual

Page 44

User’s Manual

CLIP-COPY

A–B Clip-Copy

Selecting A–B Clip-Copy will set the starting point of the video to be clip copied, and the icon displays at the
bottom-left corner of the screen. Selecting A–B Clip-Copy again will set the ending point of the video to be clip
copied and displays the Clip-Copy screen.

Clip-Copy

Select Clip-Copy, and the Clip-Copy screen appears to allow clip copy setup.

y From: Pressing the

button toggles between On and Off. When set to Off, you can enter a specific Date and Time.

When set to On, the copy will be from the first recorded image.

y To: Pressing the

button toggles between On and Off. When set to Off, you can enter a specific Date and Time.

When set to On, the copy will be to the last recorded image.

y Channels: Select the cameras that you would like to include in your video clip.
y Password: Pressing the

button displays a virtual keyboard allowing you to enter a password for reviewing the

video clips.

y Dest.: Select storage device on which you would like to record the video clip.

CAUTION: The USB device for clip copy must be FAT 16 or FAT32 format.

y File name: The DVR automatically assigns a file name to the video clip. However, you can give the video clip file

a different name. Pressing the

button displays a virtual keyboard. Enter a file name for the video you are copying

and select Close. The DVR will automatically add “.exe” to the file name.

NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |.

Once you have given the video clip a file name, select Start and press the

button. A confirmation screen displaying

data size will appear. When the storage device does not have enough space, the DVR will ask if you want to copy as
much of the video clip as possible in the available space. Select Continue and press the

button to continue clip copy.

Once the clip copy starts, you can cancel it by selecting Stop or hide the screen by selecting Close. When selecting
Close, Clip Copy continues and a confirmation screen displays when complete.

NOTE: The file size for clip copy is limited to 2GB.