Revo R16/8/4/DVR - Manual (Page 86)

User’s Manual
30
Sequence Monitoring
Clicking the button on the toolbar connects to the registered sites sequentially allowing connection to more than
one remote site and displays images from selected cameras. Clicking the button during sequence monitoring releases
sequence monitoring and maintains the current connection. For sequence monitoring to function, the sequence sites
should be registered during System setup. Refer to 3.3 Menu – System Menu for details on configuring the sequence site.
NOTE: While in the sequence monitoring mode, you cannot manually connect to sites by dragging and dropping
with the mouse.
PTZ Control
Select a PTZ camera at the remote site, and control pan, tilt and zoom.
Only the administrator can control PTZ from a remote site. The icon
will display on each camera screen when PTZ can be controlled remotely.
NOTE: Control features of the Advanced menu will be enabled when
a camera supporting PTZ features such as Speed, Auto Pan, Tour,
etc. is connected to a DVR that supports remote PTZ control.
Depending on the specifications of the PTZ camera, some features
of the Advanced menu may not be active.
NOTE: Using the mouse for PTZ control is supported. Click the left
mouse button on the image and move that image in the direction you
want to by dragging the mouse. Use the mouse wheel to zoom in and
out.
Color Control
Adjust the brightness, contrast, saturation and hue for each camera by clicking the target
icons on the Color Control panel. Clicking the
icon cancels the image processing
operation and reloads the original image. Only the administrator can adjust the image
from a remote site.
NOTE: It is important that cameras are properly adjusted. These adjustments
cannot make up for improperly adjusted cameras when the images are recorded.
Alarm Out Control
Control alarm out devices on the remote DVRs by clicking the ON or OFF buttons. Only the
administrator can control an alarm out from a remote site.
PLAYBACK AND SEARCH
RASplus allows you to play back and search recorded images on remote DVRs. It also provides additional functions
including zoom, various image enhancements, image saving and image printing. To use remote playback and search
functions, the display option must be set to of Search Screen or Watch and Search Screen during System setup.
To connect a remote site on the Search screen, select the site or camera you want to connect to in the Remote Site or
Favorite Sites panel and then drag and drop it in the desired position on the screen. The icon will be displayed on
each Search screen. The remote site connection on the Search screen will automatically be disconnected if there is no
activity for a specified amount of time. Click the button on the toolbar or select Disconnect from the System drop-
down menu to disconnect the current connection manually.