Martel Electronics 135 - Manual (Page 73)

General
Input Impedance:
Volts >10 megohms
Millivolts >10 megohms
Current 5 ohms nominal
Frequency 1 megohm nominal
Output Impedance:
Volts <5 ohms
Millivolts <5 ohms
Current >1 megohm
Frequency 100 ohms nominal
Maximum mA Loop Resistance 600 ohms
2-wire Simulator:
Max External Loop Voltage 48Vdc
Common Mode Rejection: 80 db at 60 Hz
Normal Mode Rejection: 40 db at 60 Hz
Input/Output Isolation: 100 megohms at 500Vdc
Battery Charge Time: 12-14 hours
Unit on Time: 7-8 hours typically
Environmental
Temperature:
Effect 15°C to 35°C, none
Outside this range, 10ppm/°C typical
20ppm°C maximum
Operational 0°C to 50°C
Storage (w/Batteries) -20°C to 60°C
Humidity: 10% to 90% non-condensing
Specifications subject to change without notice.
Specifications
130/135 69