beautypg.com

Martel Electronics 135 User Manual

Page 16

background image

If “Review” was selected, the test points would be displayed.





Press the INC/DEC keys to scroll through additional points. Press ENT or
CE to return to the previous menu.

Clear All Data allows “As Found” and “As Left” data previously stored to
be cleared. This option is only allowed if enabled by the Calibration
System. If this option is not enabled and is selected, the display will
indicate “Option Not Allowed”.

If AUTO was pressed to start the “As Found” test, the display will
indicate:




Once the test is completed, the display will indicate “Test Complete” on
the top line, whether the unit passed or failed on the second line and,
give the operator four choices on lines three and four - Review, Adjust,
Retest, Done. Selecting “Review” allows the operator to review the test
data, selecting “Retest” allows the test to be run again, selecting
“Done” takes the calibrator to the final sequence, selecting “Adjust”
allows the operator to adjust the instrument under test.





Selecting “Adjust” allows the operator to perform a normal calibration
procedure on the instrument under test. Pressing the INC/DEC key will

Operation

130/135

12

INPUT OUTPUT
+4.000 +1.000
+6.000 +2.000
+8.000 +3.000

MA VOLTS
+4.000 +1.000
TESTING CALPT 01
AS FOUND

TEST COMPLETE

UNIT FAILED

REVIEW ADJUST
RETEST DONE

This manual is related to the following products: