KROHNE OPTIWAVE 5200 FOUNDATION FIELDBUS - Manual (Page 71)

OPERATION
4
71
OPTIWAVE 5200 C
www.krohne.com 09/2013 - 4002500101 - AD FF OPTIWAVE 5200 R01 en
STATUS_OPTS STATUS_OPTS STATUS_OPTS STATUS_OPTS
Status Options Status Options Status Options Status Options
R/W Options which the user may select in the block processing of
status.
No option selected
Setting:
• IFS if Bad IN: Set Initiate Fault State status in OUT if the
status of IN is "Bad".
• IFS if Bad CAS_IN: Set Initiate Fault State status in OUT if
the status of CAS_IN is "Bad".
• Use Uncertain as Good: If the status of IN is "Uncertain",
treat it as "Good" otherwise treat it as "Bad".
• Target to Man if Bad IN: Set the target mode to "Man" if the
status of the IN parameter is "Bad". This latches a PID
block into the "Man" state of the input ever goes "Bad".
• Target to next permitted mode if BAD CAS_IN
TRK_IN_D TRK_IN_D TRK_IN_D TRK_IN_D
Tracking Input Tracking Input Tracking Input Tracking Input
Discrete Discrete Discrete Discrete
R/W This discrete input is used to initiate external tracking of the
block output to the value specified by TRL_VAL.
-
Status R/W Status of TRK_IN_D -
Value R/W Value of TRK_IN_D -
TRK_SCALE TRK_SCALE TRK_SCALE TRK_SCALE
Tracking Scale Tracking Scale Tracking Scale Tracking Scale
R/W The high and low scale values, engineering units code and
number of digits to the right of the decimal point associated
with TRK_VAL.
-
EU at 100% R/W The engineering unit value which represents the upper end of
range of the associated block parameter.
100
EU at 0% R/W The engineering unit value which represents the lower end of
range of the associated block parameter.
0
Units Index R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
Uninitialized
Setting:
All units are possible.
Decimal Point R/W The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
0
TRK_VALUE TRK_VALUE TRK_VALUE TRK_VALUE
Tracking Value Tracking Value Tracking Value Tracking Value
R/W This input is used as the track value when external tracking is
enabled by TRK_IN_D.
-
Status R/W Status of TRK_VAL -
Value R/W Value of TRK_VAL -
UPDATE_EVT UPDATE_EVT UPDATE_EVT UPDATE_EVT
Update Event Update Event Update Event Update Event
R This alert is generated by any change to the static data. -
Unacknowledged R A discrete enumeration which is set to "Unacknowledged"
when an alarm occurs, and set to "Acknowledged" by a write
from a human interface device or other entity which can
acknowledge that the alarm/event has been noticed.
Uninitialized
Setting:
Uninitialized / Acknowledged / Unacknowledged
Update State R A discrete enumeration which gives an indication of whether
the alert has been reported.
Uninitialized
Setting:
Uninitialized / Reported / Not Reported
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value