KROHNE OPTIWAVE 5200 FOUNDATION FIELDBUS - Manual (Page 17)

OPERATION
4
17
OPTIWAVE 5200 C
www.krohne.com 09/2013 - 4002500101 - AD FF OPTIWAVE 5200 R01 en
ITK_VER ITK_VER ITK_VER ITK_VER
ITK Version ITK Version ITK Version ITK Version
(Interoperatibility Test
Kit)
R Major revision number of the interoperability test case used to
register this device.
6.1
LIM_NOTIFY LIM_NOTIFY LIM_NOTIFY LIM_NOTIFY
Limit Notify Limit Notify Limit Notify Limit Notify
R/W Maximum number of unconfirmed alert notify messages
allowed.
20
Setting:
0...255
MANUFAC_ID MANUFAC_ID MANUFAC_ID MANUFAC_ID
Manufacturer ID Manufacturer ID Manufacturer ID Manufacturer ID
R Manufacturer identification number - used by an interface
device to locate the DD file for the resource.
KROHNE
Setting:
KROHNE
MAX_NOTIFY MAX_NOTIFY MAX_NOTIFY MAX_NOTIFY
Maximum Notify Maximum Notify Maximum Notify Maximum Notify
R Maximum number of unconfirmed alert notify messages
possible.
20
Setting:
0...255
MEMORY_SIZE MEMORY_SIZE MEMORY_SIZE MEMORY_SIZE
Memory Size Memory Size Memory Size Memory Size
R Available configuration memory in the empty resource. To be
checked before attempting a download.
0
MIN_CYCLE_T MIN_CYCLE_T MIN_CYCLE_T MIN_CYCLE_T
Minimium Cycle Time Minimium Cycle Time Minimium Cycle Time Minimium Cycle Time
R Time duration of the shortest cycle interval of which the
resource is capable (in [1/32 ms]).
6400
NV_CYCLE_T NV_CYCLE_T NV_CYCLE_T NV_CYCLE_T
Nonvolatile Cycle Nonvolatile Cycle Nonvolatile Cycle Nonvolatile Cycle
Time Time Time Time
R Interval between writing copies of NV parameters to non-
volatile memory. Zero means never (in [1/32 ms]).
256000
RESTART RESTART RESTART RESTART
Restart Restart Restart Restart
RW Allows a manual restart to be initiated. Several degrees of
restart are possible. They are 1: Run, 2: Restart resource,
3: Restart with defaults and 4: Restart processor.
Run
Setting:
Uninitialized / Run / Resource / Defaults / Processor
RS_STATE RS_STATE RS_STATE RS_STATE
Resource State Resource State Resource State Resource State
R State of the function block application state machine. Standby
Setting:
Uninitialized / StartRestart / Initialization / Online Linking /
Online / Standby / Failure
SET_FSTATE SET_FSTATE SET_FSTATE SET_FSTATE
Set Fault State Set Fault State Set Fault State Set Fault State
RW Allows the fault state condition to be manually initiated by
selecting "SET".
OFF
Setting:
Unintialized / OFF / SET
SHED_RCAS SHED_RCAS SHED_RCAS SHED_RCAS
Shed Remote Cascade Shed Remote Cascade Shed Remote Cascade Shed Remote Cascade
R/W Time duration at which to give up on computer writes to
function block RCAS locations.
640000
Setting:
0...4294967295 in [1/32 ms]
SHED_ROUT SHED_ROUT SHED_ROUT SHED_ROUT
Shed Remote Out Shed Remote Out Shed Remote Out Shed Remote Out
RW Time duration at which to give up on computer writes to
function block ROUT locations.
640000
Setting:
0...4294967295 in [1/32 ms]
TEST_RW TEST_RW TEST_RW TEST_RW
Test R Write Test R Write Test R Write Test R Write
Read/write test parameter - used only for conformance
testing.
Note: Subelements "1..15" have no function!
-
UPDATE_EVT UPDATE_EVT UPDATE_EVT UPDATE_EVT
Update Event Update Event Update Event Update Event
This alert is generated by any change to the static data. -
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value