KROHNE OPTIWAVE 5200 FOUNDATION FIELDBUS - Manual (Page 56)

4
OPERATION
56
OPTIWAVE 5200 C
www.krohne.com 09/2013 - 4002500101 - AD FF OPTIWAVE 5200 R01 en
UPDATE_STATE
Update State
R A discrete enumeration which gives an indication of whether
the alert has been reported.
Uninitialized
Setting:
Uninitialized / Update reported / Update not reported
TIME_STAMP
Time Stamp
R The time when evaluation of the block was started and a
change in alarm/event state was detected that is unreported.
The time stamp value will be maintained constant until alert
confirmation has been received - even if another change of
state occurs.
Uninitialized
Setting:
MM / DD / YY (Month / Day / Year)
HH:MM:SS (Hour:Minute:Second)
STATIC_REVISION
Static Rev
R The static revision of the block whose static parameter was
changed and is being reported. It is possible for the present
value of static revision to be greater than this because static
can be changed at any time.
0
Setting:
0…65535
RELATIVE_INDEX
Relative Index
R The OD index of the static parameter whose change caused
this alert, minus the FB starting index. If the update event was
caused by a write to multiple parameters at the same time,
then this attribute will be zero.
0
Setting:
0…65535
ANALYSIS_DATA_UPDATE ANALYSIS_DATA_UPDATE ANALYSIS_DATA_UPDATE ANALYSIS_DATA_UPDATE
Analysis Data Update Analysis Data Update Analysis Data Update Analysis Data Update
RW No help available
Data to update / Start Update / Update in progress
ANALYSIS_DATA_0 ANALYSIS_DATA_0 ANALYSIS_DATA_0 ANALYSIS_DATA_0
analysis data 0 analysis data 0 analysis data 0 analysis data 0
R The analysis data of the device used in the DTM
ANALYSIS_DATA_1 ANALYSIS_DATA_1 ANALYSIS_DATA_1 ANALYSIS_DATA_1
analysis data 1 analysis data 1 analysis data 1 analysis data 1
R The analysis data of the device used in the DTM
ANALYSIS_DATA_2 ANALYSIS_DATA_2 ANALYSIS_DATA_2 ANALYSIS_DATA_2
analysis data 2 analysis data 2 analysis data 2 analysis data 2
R The analysis data of the device used in the DTM
ANALYSIS_DATA_3 ANALYSIS_DATA_3 ANALYSIS_DATA_3 ANALYSIS_DATA_3
analysis data 3 analysis data 3 analysis data 3 analysis data 3
R The analysis data of the device used in the DTM
ANALYSIS_DATA_4 ANALYSIS_DATA_4 ANALYSIS_DATA_4 ANALYSIS_DATA_4
analysis data 4 analysis data 4 analysis data 4 analysis data 4
R The analysis data of the device used in the DTM
ANALYSIS_DATA_5 ANALYSIS_DATA_5 ANALYSIS_DATA_5 ANALYSIS_DATA_5
analysis data 5 analysis data 5 analysis data 5 analysis data 5
R The analysis data of the device used in the DTM
ANALYSIS_DATA_6 ANALYSIS_DATA_6 ANALYSIS_DATA_6 ANALYSIS_DATA_6
analysis data 6 analysis data 6 analysis data 6 analysis data 6
R The analysis data of the device used in the DTM
ANALYSIS_DATA_7 ANALYSIS_DATA_7 ANALYSIS_DATA_7 ANALYSIS_DATA_7
analysis data 7 analysis data 7 analysis data 7 analysis data 7
R The analysis data of the device used in the DTM
ANALYSIS_DATA_8 ANALYSIS_DATA_8 ANALYSIS_DATA_8 ANALYSIS_DATA_8
analysis data 8 analysis data 8 analysis data 8 analysis data 8
R The analysis data of the device used in the DTM
ANALYSIS_DATA_9 ANALYSIS_DATA_9 ANALYSIS_DATA_9 ANALYSIS_DATA_9
analysis data 9 analysis data 9 analysis data 9 analysis data 9
R The analysis data of the device used in the DTM
ANALYSIS_DATA_10 ANALYSIS_DATA_10 ANALYSIS_DATA_10 ANALYSIS_DATA_10
analysis data 10 analysis data 10 analysis data 10 analysis data 10
R The analysis data of the device used in the DTM
COLLECTION_ COLLECTION_ COLLECTION_ COLLECTION_
DIRECTORY DIRECTORY DIRECTORY DIRECTORY
Collection Directory Collection Directory Collection Directory Collection Directory
A directory that specifies the number, starting indices and DD
Item IDs of the data collections in each transducer within a
Transducer Block.
-
DIAGNOSIS_INFO DIAGNOSIS_INFO DIAGNOSIS_INFO DIAGNOSIS_INFO
diagnosis info diagnosis info diagnosis info diagnosis info
R diagnosis info
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value