KROHNE IFC 010 Converter EN - Manual

Installation and
operating
intructions
Signal converters
for
electromagnetic flowmeters
04/98
How to use these Instructions
The flowmeters are supplied ready for operation.
The primary head must be installed in the pipeline as described in the installation
instructions inside the packing of the primary head.
- Installation location and connection to power (Section 1) Pages 1/1-1/6
- Electrical connection of outputs and inputs (Section 2) Pages 2/1-2/6
- Factory settings and start-up (Section 3) Pages 3/1-3/2
- Operator control of the signal converter is described in Sections 4 and 5.
Power the flowmeter. THAT’S ALL. The system is operative.
16-page pull-out condensed instructions
are located in the centrefold of these Installation and Operation Instructions.
Contents:
Installation (Sect. 1), electrical connection (Sect. 1 + 2),
start-up (Sect. 3) and operator control of the signal converter (Sect. 4)
3.1M61EA4 049821 Order No. 7.02140.34.00
US size: 7.02140.74.00
IFC 010 K
IFC 010 F
Applicable to
Software Versions
••
IFC 010 _ / D
Display version
No. 806325.07
and
No. 317551.02
and higher
••
IFC 010 _ / B
Basic version
operator-controllable
with HHT 010
No. 806323.06
and higher