KROHNE H250 M40 EN - Manual (Page 43)

OPERATION
6
43
H250 M40
www.krohne.com 11/2012 - 4000640702 MA H250 M40 R02 en
6.6 Menu indicator ESK4-T
6.6.1 factory settings
Menu Function Adjustment
1.1.1 OUTPUT B1 INACTIVE
1.2.1 OUTPUT B2 INACTIVE
1.3.1 Pulse width 100 ms100ms
1.3.2 Pulses / unit 1,000000 Pulses / L
1.4.1 Screen FLOW RATE
1.4.2 DISPLAY ROTATION 0°
1.5 TIME CONST. 001.0 s
1.6.1 RESET COUNT. NO
1.6.2 RESET ERROR NO
1.6.3 WRITE INFO I/O NO
3.1 LANGUAGE ENGLISH
3.2 FUNCTION B1 INACTIVE
3.3 CONTACT B1 NO CONTACT
3.4 FUNCTION B2 INACTIVE
3.5 CONTACT B2 NO CONTACT
3.6 FUNCTION B3 INACTIVE
3.7 MULTIDROP POLLING ADD: 00
3.8 4mA CALIBR. 4.000 mA
3.9 20mA CALIBR. 20.000 mA
3.10 ALARM CURRENT ALARM HIGH
3.11.1 FS&UNIT l/hr
3.11.2 COUNTER l
3.12 Low flow cutoff treshold 4% ON 6% OFF
3.13 ENTRY CODE OFF
3.14 BASIC SETTING NO
INFORMATION!
The measuring device has been preset at the factory in accordance with the customer order.
Therefore subsequent configuration via the menu is only necessary if the intended use of the
device is changed.
MA_H250_M40_R02_en_640702_PRT.book Page 43 Wednesday, November 28, 2012 12:23 PM