KROHNE H250 M40 EN - Manual (Page 38)

6
OPERATION
38
H250 M40
www.krohne.com 11/2012 - 4000640702 MA H250 M40 R02 en
6.3 Basic principles of operation ESK4-T
6.3.1 Functional description of the buttons
6.3.2 Navigation within the menu structure
Navigate through the menu using the →, ↑ and ^ ^ ^ ^ keys. Pressing the → key takes you one menu
lower. Use the ↑ key to go one menu point higher (e.g. from 1 to 2). Pressing the ^ ^ ^ ^ key takes you
one menu higher.
If you are already at the lowest level (function level), you can use the button to go to the change
mode, which can be used to set data and values.
If you are located at the first level (main menu), you can use the ^ ^ ^ ^ key to exit the menu mode and
return to the measuring mode.
If settings were changed, the query whether they should be saved will appear. Confirm this query
with the → key or cancel it with the ^
^ ^ ^ key.
→
Switch from measuring mode to menu mode
Switch to one menu level lower
Open menu item and activate change mode
Confirm query whether data should be accepted.
In change mode: In change mode: In change mode: In change mode: Move the input cursor one position to the right. After the last digit the
input cursor jumps back to the beginning.
↑
Change between the menu items within a menu level
In measuring mode: In measuring mode: In measuring mode: In measuring mode: Switch between measured values and error messages
In change mode: In change mode: In change mode: In change mode: Changing parameters or settings. Run through the available characters
(including decimal point.
^ ^ ^ ^
In measuring mode: In measuring mode: In measuring mode: In measuring mode: Switch between measured value display and error messages /
warnings
Switch to one menu level higher
Return to measuring mode with a query whether the data should be accepted
Cancel the query, whether data should be accepted.
Table 6-2: Description of the operating keys
measuring
mode
→ Main menu
↑
→ Submenu
↑
→ Function
↑
→ Edit
→ ↑ ^ ^ ^ ^
^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
Table 6-3: Navigation menu structure
MA_H250_M40_R02_en_640702_PRT.book Page 38 Wednesday, November 28, 2012 12:23 PM