KROHNE H250 M40 EN - Manual (Page 40)

6
OPERATION
40
H250 M40
www.krohne.com 11/2012 - 4000640702 MA H250 M40 R02 en
6.4 Overview of the units ESK4-T
6.5 Error messages ESK4-T
Error messages and warnings are indicated by one of the following symbols in the bottom left
corner of the display. The ^
^ ^ ^ key switches from the measured value display to the display of
current errors / warnings. The table below contains a description of possible error messages.
Measured
variables Units
volume m 3 /s m 3 /min m 3 /h m 3 /d
L/s L/min L/h -
ft 3 /s ft 3 /min ft 3 /h ft 3 /d
gal/s gal/min gal/h gal/d
bbl/s bbl/min bbl/h bbl/d
ImpGal/s ImpGal/min ImpGal/h ImpGal/d
mass g/s g/min g/h -
kg/s kg/min kg/h kg/d
- t/min t/h t/d
lb/s lb/min lb/h lb/d
- STon/min STon/h STon/d
- - LTon/h LTon/d
Volume Totalizer m 3 l hl ft 3
ImpGal gallon bbl bbl (liq)
mass totalizer kg g t lb
STon LTon
Temperature ° C ° F K
Symbols
1 Error
2 Warning - out of specification
3 Function check
4 Maintenance necessary.
MA_H250_M40_R02_en_640702_PRT.book Page 40 Wednesday, November 28, 2012 12:23 PM