KROHNE OPTISENS MAC 080 EN - Manual (Page 5)

SAFETY INSTRUCTIONS
1
5
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
Safety instructions
1.1 Softwarehistory
1.2 Intended use
In combination with different OPTISENS 2000 sensors the MAC 080 is used to measure
suspended solids, dissolved oxygen, pH, ORP and other parameters in waste water treatment
applications.
1.3 Certifications
The device fulfils the statutory requirements of the following EC directives:
• Electromagnetic compatibility (EMC) in accordance with:
EN 61000-6-4:2001: Emission standard for industrial environments;
EN 61000-6-2:2001: Immunity for industrial environments
• Low Voltage Directive:
Safety requiremwnts for electrical equipment for measurement, control and laboratory use
in accordance with EN 61010-1:2001
The manufacturer certifies successful testing of the product by applying the CE marking.
Release date Software version Documentation
05/2008 3.02 MA MAC 080 R01
10/2009 3.02 MA MAC 080 R02
CE marking
.book Page 5 Tuesday, January 19, 2010 1:07 PM