KROHNE OPTISENS MAC 080 EN - Manual (Page 41)

TECHNICAL DATA
8
41
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
8.2 Technical data
INFORMATION!
•
The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local representative.
• Additional information (certificates, special tools, software,...) and complete product
documentation can be downloaded free of charge from the website (Download Center).
Measuring system
Measuring principle Digital multiparameter converter for connection of up to four sensors.
The converter is controlled by a 16 bit micropocessor and the communication to the
sensor is realised via RS485.
Field of application Monitoring and control of waste water treatment processes.
Design
Construction A typical measuring system consists of:
• MAC 080 multiparameter converter
• 1 (or up to 4) OPTISENS 2000 sensors
• Solenoid valves for flushing
• MAA 2000 mounting assemblies
Option Mounting plate and mounting post
Display and user interface Display and user interface Display and user interface Display and user interface
Graphic display Illuminated LC display
Size: 64 x 128 pixels, corresponds to 70 x 40 mm = 2.76" x 1.57"
Operating elements Three button membrane keypad
Language of display texts English, German, Swedish
Units Metric and US units selectable
Measuring error
Measuring error For detailed information refer to technical data for the relevant sensor.
Display resolution Suspended solids: no decimal place (0.1 in extended mode)
DO: 0.1 (or 0.01 in extended mode)
pH: 0.1 pH (or 0.01 pH in extended mode)
ORP: no decimal place
Temperature: 0.1°C / 0.1°F
Operating conditions
Ambient temperature -20...+50°C / -4...+122°F
Process temperature -20...+50°C / -4...+122°F
Storage temperature 0…+60°C / +32…+140°F
Process pressure Atmosphere
Other conditions Other conditions Other conditions Other conditions
Protection category IP65 (Nema 4X)
.book Page 41 Tuesday, January 19, 2010 1:07 PM