beautypg.com

Installation – KROHNE OPTISENS MAC 080 EN User Manual

Page 14

background image

3

INSTALLATION

14

OPTISENS MAC 080

www.krohne.com

01/2010 - MA MAC 080 R02 en

3.3.2 Two parameter measuring point

The figure above shows a two parameter measuring point consisting of one converter 1, two
sensors 4 with a telescopic rod immersion assembly as sensor holder 3 and one solenoid valve
2 for flushing.

Both sensors are flushed via one solenoid valve using an optional Y-splitter.

For connection of two sensors to the converter an optional junction box is needed.

1 Converter
2 Solenoid valve for flushing (to be ordered with converter)
3 Mounting assembly
4 Sensor incl. 10 m / 33 ft cable and flush hose
5 Junction box for connection of up to 4 sensors (to be ordered with converter)
6 Mounting post
7 Mounting plate with sun shield

.book Page 14 Tuesday, January 19, 2010 1:07 PM