Electrical connections, 3 jumper settings and connector x9 – KROHNE OPTISENS MAC 080 EN User Manual

Page 20

Text mode
Original mode

ELECTRICAL CONNECTIONS

OPTISENS MAC 080

www.krohne.com

01/2010 - MA MAC 080 R02 en

4.3 Jumper settings and connector X9

The converter has four jumpers to configure the board.

Jumpers

Figure 4-2: Overview of jumpers/connectors

1 Display
2 Jumper JP14
3 Jumper JP1
4 Jumper JP7
5 Jumper JP2
6 Connector X9 (RS232)

CAUTION!
Do not change the setting of jumper JP14. Improper setting of jumper JP14 may destroy the unit
and will void the warranty! Only to be changed by authorized service personnel.

Function

Jumper/connector

Analog outputs

Jumper JP1

Jumper JP7

Digital inputs

Jumper JP2

Program download (for service use only)

Jumper JP14

PC-cable connector (for service use only)

Connector X9

.book Page 20 Tuesday, January 19, 2010 1:07 PM