KROHNE OPTISENS MAC 080 EN - Manual (Page 33)

OPERATION
6
33
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
Transmitter on slot1 is using Channel 1! Transmitter on slot1 is using Channel 1! Transmitter on slot1 is using Channel 1! Transmitter on slot1 is using Channel 1!
The chosen 4...20 mA output is used by sensor in slot 1. The converter has two 4...20 mA outputs,
please consult your project documents. Optional 4...20 mA module will give two more.
No transmitter measuring! No transmitter measuring! No transmitter measuring! No transmitter measuring!
Calibration or another function has been aborted due to the sensor being lost. Maybe the sensor
cable was disconnected.
Not possible, currently storing Not possible, currently storing Not possible, currently storing Not possible, currently storing
Some functions can not be run while the converter is storing data in the sensor. Wait until the
storing symbol in the main display disappears.
Not possible, currently cleaning Not possible, currently cleaning Not possible, currently cleaning Not possible, currently cleaning
Some functions can not be run while the sensor is being cleaned. Wait until the cleaning symbol
in the main display disappears.
.book Page 33 Tuesday, January 19, 2010 1:07 PM