KROHNE OPTISENS MAC 080 EN - Manual (Page 35)

OPERATION
6
35
OPTISENS MAC 080
www.krohne.com 01/2010 - MA MAC 080 R02 en
6.2.2 Menu "System"
Menu Description
Version Version Version Version Program version, read only.
Serial Serial Serial Serial Circuit board S/N, read only.
Box temp Box temp Box temp Box temp Internal box temperature, read only.
Exp.Module Exp.Module Exp.Module Exp.Module Press ^ to see the Fieldbus status sub menu.
Fieldbus Yes or no, read only.
Installed Yes or no, read only.
Hardwarefail Yes or no, read only.
Initialised Yes or no, read only.
Online Yes or no, read only.
Software v. Software version of the Profibus module, read only.
Out data Last data sent to master, read only.
Err Cmd Last error, read only
Err Cmd 1 Last error, read only
SW Reset Restart the fieldbus module.
Test Test Test Test Press ^ to go to the system test sub menu.
Dig.in Calibration curve selected by the digital inputs.
Relay1 "Off" / "On"; Be careful if something is connected to the relay. If the
relay is configured for a function, it cannot be changed.
Relay2 "Off" / "On"; Be careful if something is connected to the relay. If the
relay is configured for a function, it cannot be changed.
Analog 1 mA Analog output 1, press ^ to get 4/20 mA output.
Analog 2 mA Analog output 2, press ^ to get 4/20 mA output.
Analog 3 mA Analog output 3 (only with extra 4...20 mA module).
Analog 4 mA Analog output 4 (only with extra 4...20 mA module).
Panel LED Green / Red.
Box heat Off / On, read only.
Service Service Service Service Locked service menu for internal use of manufacturer.
.book Page 35 Tuesday, January 19, 2010 1:07 PM