KROHNE IFC 100 Converter FOUNDATION FIELDBUS - Manual (Page 22)

4
OPERATION
22
IFC 100
www.krohne.com 02/2012 - 4001702901 - AD IFC 100 FF R01 en
FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO
Foundation Fieldbus Foundation Fieldbus Foundation Fieldbus Foundation Fieldbus
Board Information Board Information Board Information Board Information
For details see subelements. -
IDENT_NUMBER
Ident Number
R Actual ident number
HARDWARE_ID
Hardware Ident
Number
Actual hardware number
SOFTWARE_VERSION
Software Version
Actual software version
PRODUCTION_DATE
Production Date
Date of production
CALIBRATION_DATE
Calibration Date
Date of calibration
FF_SERIAL_NO
Foundation Fieldbus
Serial Number
Actual serial number
OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR
Operation Hour Operation Hour Operation Hour Operation Hour
R Operation hour since first power-up. Current operation
hours
PASSWRD PASSWRD PASSWRD PASSWRD
Password Password Password Password
R/W Password to activate access rights to restricted parameters. 0
PROTECT_INFO PROTECT_INFO PROTECT_INFO PROTECT_INFO
Access Protection Access Protection Access Protection Access Protection
R Current protection level to restricted parameters. Production
Setting:
Concentration / bit 5…6 (not used) / User / Service Level /
Production / Custody Transfer / Write Lock
SERIAL_NO SERIAL_NO SERIAL_NO SERIAL_NO
Serial Number Serial Number Serial Number Serial Number
R Device serial number, serial number of the system. Current serial
number
SW_SIMULATE SW_SIMULATE SW_SIMULATE SW_SIMULATE
Software Simulate Software Simulate Software Simulate Software Simulate
R/W Enable/disable simulation like hardware jumper. Disable
Setting:
Disable / Active