KROHNE IFC 100 Converter FOUNDATION FIELDBUS - Manual (Page 14)

4
OPERATION
14
IFC 100
www.krohne.com 02/2012 - 4001702901 - AD IFC 100 FF R01 en
DEV_REV DEV_REV DEV_REV DEV_REV
Device Revision Device Revision Device Revision Device Revision
R Manufacturer revision number associated with the resource -
used by an interface device to locate the DD file for the
resource.
Dependent on
device version
Setting:
Dependent on device version
DEV_TYPE DEV_TYPE DEV_TYPE DEV_TYPE
Device Type Device Type Device Type Device Type
R Manufacturer's model number associated with the resource -
used by interface devices to locate the DD file for the
resource.
IFC100
Setting:
IFC100
FAULT_STATE FAULT_STATE FAULT_STATE FAULT_STATE
Fault State Fault State Fault State Fault State
R Condition set by loss of communication to an output block,
failure promoted to an output block or a physical contact.
When fault state condition is set, then output function blocks
will perform their "FSTATE" actions.
Clear
Setting:
Uninitialized / Clear / Active
FEATURES FEATURES FEATURES FEATURES
Features Features Features Features
R Used to shows supported resource block options. Reports /
Soft W Lock /
MVC Report
Distribution
supported /
MVC
Publishing/Subscri
bing supported/
Multi-bit Alarm
(Bit-Alarm)
Support
Setting:
Reports / Soft W Lock / MVC Report Distribution supported /
MVC Publishing/Subscribing supported / Multi-bit Alarm (Bit-
Alarm) Support
FEATURES_SEL FEATURES_SEL FEATURES_SEL FEATURES_SEL
Features Selection Features Selection Features Selection Features Selection
R/W Used to select resource block options. Reports /
Soft W Lock
Setting:
Reports / Soft W Lock / MVC Report Distribution supported /
MVC Publishing/Subscribing supported / Multi-bit Alarm (Bit-
Alarm) Support
FREE_SPACE FREE_SPACE FREE_SPACE FREE_SPACE
Free Space Free Space Free Space Free Space
R Percent of the memory available for further configuration.
Zero in a preconfigured device.
0.0
Setting:
0.0…100.0
FREE_TIME FREE_TIME FREE_TIME FREE_TIME
Free Time Free Time Free Time Free Time
R Percent of the block processing time that is free to process
additional blocks.
0.0
Setting:
0.0…100.0
GRANT_DENY GRANT_DENY GRANT_DENY GRANT_DENY
Grant Deny Grant Deny Grant Deny Grant Deny
Options for controlling access of host computers and local
control panels to operating, tuning and alarm parameters of
the block.
-
GRANT
Grant
R/W Depending on the philosophy of the plant, the operator or a
higher level device (HLD) or a local operator's panel (LOP) in
the case of "Local", may turn on an item of the "Grant"
attribute - "Program, Tune, Alarm or Local".
Uninitialized
Setting:
Program / Tune / Alarm / Local / Operate
DENY
Deny
R/W The denied attribute is limited for use by a monitoring
application in an interface device and may not be changed by
an operator.
Uninitialized
Setting:
Program denied / Tune denied / Alarm denied / Local denied /
Operate denied
HARD_TYPES HARD_TYPES HARD_TYPES HARD_TYPES
Hard Types Hard Types Hard Types Hard Types
R The types of hardware available as channel numbers. Scalar input
Parameter Parameter Parameter Parameter
Subelement Access Description and settings Initial Value