In-Situ Rugged TROLL 100/200 Operators Manual - Manual (Page 42)

800-446-7488 42 www.in-situ.com
Guidelines for Cleaning Returned Equipment
Please help us protect the health and safety of our employees by cleaning and
decontaminating equipment that has been subjected to any potential biological or
health hazards, and labeling such equipment. Unfortunately, we cannot service your
equipment without such notification. Please complete and sign the form in your
Operator’s Manual (or a similar statement certifying that the equipment has been
cleaned and decontaminated) and send it with each returned instrument.
l
We recommend a cleaning solution, such as Alconox
®
, which is a glassware
cleaning product available from In-Situ Inc. (part number 0029810) or laboratory
supply houses.
l
Clean all cabling. Remove all foreign matter.
l
Clean cable connector(s) with a clean, dry cloth. Do not submerge cable
connectors.
l
Clean the probe body—including the nose cone, cable head, and protective caps.
Remove all foreign matter.
If an instrument is returned to our Service Center for calibration or repair without a
statement that it has been cleaned and decontaminated, or in the opinion of our Service
Representatives presents a potential health or biological hazard, we reserve the right to
withhold service until proper certification has been obtained.