In-Situ Rugged TROLL 100/200 Operators Manual - Manual (Page 20)

800-446-7488 20 www.in-situ.com
Screen Element Definition
The Logging tab displays a list of logs stored in the connected
instrument. When you click the Logging tab, it can take a moment
for the software to retrieve information from the instrument. The
Logging tab is not applicable for non-logging instruments such as
the RDO PRO Probe.
The Sensors tab lists the sensors in the connected instrument,
along with their serial numbers and the dates of factory calibration
and user calibration. Use the buttons in this tab to calibrate sensors
that support user calibration and configure sensors that support
configuration.
The Device Setup tab allows access to instrument information and
settings such as instrument name, serial number, firmware version,
communication settings, diagnostics, and factory reset options.