In-Situ Rugged TROLL 100/200 Operators Manual - Manual (Page 11)

800-446-7488 11 www.in-situ.com
Getting Started
You will need the following items.
l
Rugged TROLL 100 or 200 instrument
l
Rugged BaroTROLL (optional)
l
USB or RS232 docking station (The RS232 model is needed for connection to a
RuggedReader Handheld PC and the Rugged BaroTROLL.)
l
Rugged TROLL Com (for Rugged TROLL 200 and Rugged BaroTROLL).
Install Software
Install the following software from the In-Situ Software CD or from www.in-situ.com.
Win-Situ 5 Software
1. Click the Win-Situ 5 link and follow the installation instructions.
2. Make sure that you select the option to "Install USB Drivers."
Win-Situ Mobile Software for the RuggedReader Handheld PC
1. Click the Win-Situ Mobile link and follow the instructions to install Win-Situ Software
Manager, which checks for software updates and transfers data.
2. If you are using Windows XP operating system, install ActiveSync 4.5 or higher. If
you are using Windows Vista, Windows 7, or Windows 8, install Windows Mobile
Device Center software in order to communicate with the RuggedReader Handheld
PC.
3. Win-Situ Mobile is probably already installed on the RuggedReader. If you need to
install Win-Situ Mobile, connect the RuggedReader to the PC via USB to serial
cable, establish a connection via ActiveSync, open the Win-Situ Software Manager,
click Win-Situ Mobile, click Install. Make sure you have your In-Situ Software
License Certificate available.
Win-Situ Baro Merge Software
Install Baro Merge Software if you plan to post-correct level data to compensate for
barometric pressure.
Win-Situ Sync Software
Install Win-Situ Sync if you want to automatically transfer downloaded log files from a
RuggedReader to a PC.