In-Situ Rugged TROLL 100/200 Operators Manual - Manual (Page 12)

800-446-7488 12 www.in-situ.com
Connect to the Rugged TROLL Docking Station
The docking station is intended for use with the Rugged TROLL 100, 200 and Rugged
BaroTROLL Instruments that are not deployed with a communication cable. Once
connected, you can program the instrument, view readings, and download the data.
1. Unscrew and remove the hanger from the instrument.
The hanger is the only removable part of the instrument. Do not
attempt to take the instrument apart. There are no user-
serviceable parts in the instrument.
2. Invert the instrument. Align the notch on the instrument with the tab on the rim of the
docking station. This will ensure that the pins are aligned to enable communication.
3. Place the instrument into the docking station.
4. Connect the docking station to a computer.
Connect to the Rugged TROLL Com
The Rugged TROLL Com is used as a communication interface between a Rugged
TROLL 200 or a Rugged BaroTROLL instrument, the Rugged TROLL 200 cable, and a
computer or a RuggedReader Handheld PC.