In-Situ Rugged TROLL 100/200 Operators Manual - Manual (Page 24)

800-446-7488 24 www.in-situ.com
Logging Tab
The Logging tab displays a list of logs in the instrument. When you click the Logging
tab, it may take a moment for the software to retrieve information from the instrument.
Log Information
Columns across the Logging screen show information about the logs in the instrument.
l
Symbol—This is a graphic representation of the information in the Status
column.
l
Site—The site that was specified when the log was configured.
l
Log Name—The name that was entered when the log was configured.
l
Type—The logging method that was selected when the log was configured.
l
Start Time—For a Pending log, the scheduled start time is shown. For a Ready
log that has not yet started, this column displays “Manual.” For a Running or
Stopped log, the actual start time is shown.
l
Scheduled Stop Time—For a log with a scheduled stop, the scheduled stop time
is shown. For a log without a scheduled stop time, this column is blank.
l
Stop Time—For a Pending or Ready log, this column is blank. For a Running
log, the time of the last data point is shown. For a Stopped log, the actual stop
time is shown.
l
Status—Each log has a specific status. See Log Status for details.