beautypg.com

Set duty cycle, Maximum frequency limit error, Minimum frequency limit error – GW Instek SFG-1000 Series User Manual

Page 27: Enter duty cycle

background image

TTL Output

27

For full error message list, see page37.

Maximum
frequency
limit error

TTL frequency is limited to

maximum 3MHz. When the
input exceeds it, an error

message (Err-1) appears and

forces the frequency to 3MHz.

For full error message list, see page37.

Minimum
frequency
limit error

The minimum frequency is

0.1Hz. When the frequency
input becomes less than 0.1Hz,
an error message (Err-4)

appears and forces the
frequency to 0.1 Hz.

Set Duty Cycle

Enter duty
cycle

ADJ

DUTY

1. Pull out the Duty knob. Turn

right (left) to increase (decrease)
the duty cycle. The default is set

at 50%.

2. Press the Duty knob. The duty

cycle is reset to 50%.

Range

25% ~ 75%

See also other documents in the category GW Instek Equipment: